SoloStats InsightsYour teamsided out effectively.

SIDE OUT %

58%

Min 0Max 100
Typical band: 44–62%Target marker: 52%

The insights were hiding in plain sight.

Your stats, analyzed in about 15 seconds.

How it starts

You know there's plenty to learn from each match

Sometimes you don't have the time, or you don't know the right way to look at things.

Is .180 hitting efficiency good for our level?

I know our passing was an issue, but which rotation was worst?

Where are we actually weakest right now?

How it works

Four steps from stats to practice priorities

Track matches in SoloStats123, then open SoloStats Coach to pick matches and run SoloStats Insights. No export, no setup, nothing to re-enter.

1

Track stats in SoloStats123

Match stats start in SoloStats123. That is what Insights analyzes.

2

Open SoloStats Coach

Pick your matches. One game or many. Works best with 4 or more.

3

Run SoloStats Insights

See how your team is performing compared to your competition level.

4

Plan practice

Focus your next practice based on your biggest priorities.

What was hiding

Here's what your stats have been trying to tell you

Every metric benchmarked to your competition level. Every finding tied back to the data. No generic advice - just your team, your numbers, your priorities. Below is the same insights layout coaches see in the browser, sample labels only.

Sample data. Names and numbers are illustrative.

SoloStats

Share

Program 16 National

Club 16 · 2 matches · 5 sets · Sample report

Across 5 sets over 2 tracked matches, your team scored on 38.6% of points while siding out at a strong 60.7%, showing you defend and transition well even when your own serve and attack struggle to finish points. Your passing held up at 2.01, which gives your offense a solid base to work from. Below is the same structure you get in SoloStats Insights: KPI strip, skill sections, and takeaways tied to your tracked data.

SIDE OUT %

↑60.7%

vs target 50.0%

POINT SCORING %

↓38.6%

vs target 50.0%

PASS RATING

↑2.01

vs level target 1.90

HITTING EFF.

→.186

vs level target .200

Serving

Opponents side out on 61.4% of your serves, so the priority is applying pressure rather than eliminating every error. Aces are arriving at 0.8 per set, and point scoring on serve sits at 38.6%, which shows the serve is creating real pressure.

  • Serving is generating pressure with 0.8 aces per set and a 38.6% point scoring rate on serve.

Player breakdown

Metric: aces per set (higher is better)

Bars use a 0-1.00 aces/set scale so you can compare serve aggression across the roster.

  • Player 1
    0.70
  • Player 2
    0.50
  • Player 3
    0.30
  • Player 4
    0.00
  • Player 5
    0.00
  • Player 6
    0.00

Receive

Passing is a clear strength at a 2.01 pass rating, and receive errors are low at 0.4 per set, giving the offense consistent first-ball options.

  • Passing is reliable with a 2.01 pass rating and only 0.4 receive errors per set.

Error load

0.40 errors/set

0 errors/set (clean side)Win threshold: 3.50 errors/set7 errors/set (pressure side)

Player breakdown

Metric: pass rating on 0-3 scale (higher is better)

Bars use a 0-3.00 pass-rating scale (same 0-3 rubric as the metric).

  • Player 1
    2.33
  • Player 2
    2.00
  • Player 3
    2.00
  • Player 4
    1.93
  • Player 5
    1.84

Attacking

Hitting efficiency sits at 0.186, which is within the typical range but leaves room to grow. Attack errors at 3.4 per set are the main drag on converting good sets into points.

  • Attack volume is steady and hitting efficiency of 0.186 sits within the typical range.
  • Attack errors at 3.4 per set are the main drag on converting good sets into points.

Error load

3.40 errors/set

0 errors/set (clean side)Win threshold: 5.50 errors/set11 errors/set (pressure side)

Player breakdown

Metric: hitting efficiency (0.000 format; positive is better)

Bars use a 0-0.500 hitting-efficiency scale.

  • Player 1
    +0.500
  • Player 2
    +0.500
  • Player 3
    +0.133
  • Player 4
    +0.125
  • Player 5
    +0.059
  • Player 6
    +0.000

Defense

Digging is generating a high number of errors at 3.6 per set, which is the largest error source on the team and reduces the number of free balls your offense receives.

  • Dig errors at 3.6 per set are the highest error category and cut into transition opportunities.

Error load

3.60 errors/set

0 errors/set (clean side)Win threshold: 4.50 errors/set9 errors/set (pressure side)

Blocking

Blocking is netting a small positive at 0.4 block points per set, with 1.6 block errors per set holding back the net game.

  • Blocking produces a net positive of 0.4 per set.
  • Block errors at 1.6 per set offset much of the stoppage value at the net.

Error load

1.60 errors/set

0 errors/set (clean side)Win threshold: 1.50 errors/set4 errors/set (pressure side)

Key takeaways

What's working

  • Side out at 60.7% shows your defense and transition are holding up under pressure.
  • Pass rating of 2.01 gives the offense a dependable starting point.

Watch items

  • Attack errors at 3.4 per set and dig errors at 3.6 per set are the biggest drains on scoring.

What to work on next

  1. Cut attack errors. Reduce the 3.4 attack errors per set to lift hitting efficiency above its current 0.186.
  2. Tighten digging. Lower dig errors from 3.6 per set to create more controlled transition opportunities.
  3. Convert serve pressure into points. Keep applying pressure with 0.8 aces per set and push point scoring on serve above 38.6%.

Were these insights helpful?

👍👎

Illustrative layout: club names and values are anonymized samples, not live data.

Report types

Different ways to understand your team

Team and Match Insights are live. Player Insights is coming soon. Player-level breakdowns inside a team report are available today.

Team Insights 👥

Whole team across matches, benchmarked by level, plus player-level breakdowns to support lineup and practice decisions.

Match Insights 🏐

A single-match readout of how your team performed and what to practice next, from the stats you already tracked.

Player Insights 🏅

Coming soon

A one-player view with development priorities. Coming soon.

Competition levels

Good numbers depend on your level

A 2.1 pass rating is strong at Club 12 and average at Club 18. Every set of insights compares your stats to the right standard.

Club 12Club 14Club 16Club 18HS Sub-JVHS VarsityJunior CollegeUniversity

Get started

If you use any SoloStats app to take stats, your insights are a few clicks away.

No new accounts. No export. No setup.

  • ✓A SoloStats Standard or Pro account
  • ✓At least one match tracked in SoloStats123. Works best with 4 or more.
  • ✓Your team's competition level - this calibrates the benchmarks
  • ✓SoloStats Coach to run Insights - they open automatically in a new browser tab

FAQ

A few things coaches ask

Does SoloStats Insights take stats for me, or analyze video?

No. SoloStats Insights does not take stats for you, and it is not an AI video stat tool. You track matches in SoloStats123, then SoloStats Insights turns those existing stats into actionable insights and ranked practice priorities.

Do I have to re-enter stats or does it use what's in SoloStats Coach?

It uses the stats already tracked in SoloStats123. You select the matches you want, then generate insights directly from that data.

Can I run this on a single match or do I need multiple?

One match works, but it works best with 4 or more. More matches give stronger patterns.

What does this show me that I can't see in SoloStats Coach?

SoloStats Coach shows raw stats. Insights adds benchmarks and ranked practice priorities.

What if my competition level isn't set yet?

You can set or update the level before generating insights. That calibration is what makes the benchmark comparisons meaningful.

How do I save or share the insights?

Insights open in your browser, so you can save or share them using your browser tools, including print to PDF and link sharing.

What's actually doing the analysis - is this AI?

Yes, it is AI. SoloStats Insights uses AI on the stats you already tracked in SoloStats123, compares them to your competition level benchmarks, and applies pattern analysis to highlight what matters most right now, including ranked practice priorities.

Does it update automatically after new matches?

Generate again anytime after new matches are added. Each run reflects the selected data and gives you an updated set of priorities.

How long does a report take?

About 15 seconds.

How many reports do I get?

Standard includes 50 credits a month, enough for about 5 team reports. Each report uses credits from your plan.

What if I use them all?

You can still open every report you already ran. New reports need credits, which refresh when your plan resets each month, or you can move to Pro for 200 credits a month (about 20 team reports).

Do unused credits roll over?

No. Unused credits reset each month.

Your stats have been waiting. Get your readout.

You're already tracking in SoloStats123. Insights turns those stats into a clear readout of how your team performed and what to practice next.

Already on Standard? Open SoloStats Coach, select matches, get Insights.

SoloStats Insights works with SoloStats Coach - Built for volleyball coaches

Explore all SoloStats products