SoloStats Standard

Stop Guessing.Start Knowing.

SoloStats Insights answers your post-match questions and ranks what to work on next. Benchmarked to your level, ready in about 15 seconds.

SIDE OUT %

↑60.7%

POINT SCORING %

↓38.6%

PASS RATING

↑2.01

HITTING EFF.

→.186

Sample

You ask these after every match

Stats hold the answers. You just need time to find them.

  • “Is .180 hitting efficiency good for our level?”
  • “I know our passing was an issue. How far off are we compared with teams at our level?”
  • “Where are we actually weakest right now?”

What you get with SoloStats Insights

  • See how your team performed.

    Serving, passing, attacking, defense, and blocking, each benchmarked to your competition level, in plain language.

  • Know what's working and what isn't.

    Every strength and weakness explained, with the numbers behind it.

  • Plan practice in minutes, not hours.

    Ranked practice priorities from your actual numbers. No Sunday-night spreadsheet.

Four steps. Under two minutes.

SoloStats Insights is included with Standard.

  1. Track stats in SoloStats123

    Match stats start in SoloStats123. That is what Insights analyzes.

  2. Open SoloStats Coach

    Pick your matches. One game or many. Works best with 4 or more.

  3. Run SoloStats Insights

    Compared to your competition level.

  4. Plan practice

    You already know what to work on.

See it for yourself

Your stats, explained

Sample report. Same layout you get in the browser. Names and numbers are illustrative.

SoloStats

Share

Program 16 National

Club 16 · 2 matches · 5 sets · Sample report

Across 5 sets over 2 tracked matches, your team scored on 38.6% of points while siding out at a strong 60.7%, showing you defend and transition well even when your own serve and attack struggle to finish points. Your passing held up at 2.01, which gives your offense a solid base to work from. Below is the same structure you get in SoloStats Insights: KPI strip, skill sections, and takeaways tied to your tracked data.

SIDE OUT %

↑60.7%

vs target 50.0%

POINT SCORING %

↓38.6%

vs target 50.0%

PASS RATING

↑2.01

vs level target 1.90

HITTING EFF.

→.186

vs level target .200

Serving

Opponents side out on 61.4% of your serves, so the priority is applying pressure rather than eliminating every error. Aces are arriving at 0.8 per set, and point scoring on serve sits at 38.6%, which shows the serve is creating real pressure.

  • Serving is generating pressure with 0.8 aces per set and a 38.6% point scoring rate on serve.

Player breakdown

Metric: aces per set (higher is better)

Bars use a 0-1.00 aces/set scale so you can compare serve aggression across the roster.

  • Player 1
    0.70
  • Player 2
    0.50
  • Player 3
    0.30
  • Player 4
    0.00
  • Player 5
    0.00
  • Player 6
    0.00

Receive

Passing is a clear strength at a 2.01 pass rating, and receive errors are low at 0.4 per set, giving the offense consistent first-ball options.

  • Passing is reliable with a 2.01 pass rating and only 0.4 receive errors per set.

Error load

0.40 errors/set

0 errors/set (clean side)Win threshold: 3.50 errors/set7 errors/set (pressure side)

Player breakdown

Metric: pass rating on 0-3 scale (higher is better)

Bars use a 0-3.00 pass-rating scale (same 0-3 rubric as the metric).

  • Player 1
    2.33
  • Player 2
    2.00
  • Player 3
    2.00
  • Player 4
    1.93
  • Player 5
    1.84

Attacking

Hitting efficiency sits at 0.186, which is within the typical range but leaves room to grow. Attack errors at 3.4 per set are the main drag on converting good sets into points.

  • Attack volume is steady and hitting efficiency of 0.186 sits within the typical range.
  • Attack errors at 3.4 per set are the main drag on converting good sets into points.

Error load

3.40 errors/set

0 errors/set (clean side)Win threshold: 5.50 errors/set11 errors/set (pressure side)

Player breakdown

Metric: hitting efficiency (0.000 format; positive is better)

Bars use a 0-0.500 hitting-efficiency scale.

  • Player 1
    +0.500
  • Player 2
    +0.500
  • Player 3
    +0.133
  • Player 4
    +0.125
  • Player 5
    +0.059
  • Player 6
    +0.000

Defense

Digging is generating a high number of errors at 3.6 per set, which is the largest error source on the team and reduces the number of free balls your offense receives.

  • Dig errors at 3.6 per set are the highest error category and cut into transition opportunities.

Error load

3.60 errors/set

0 errors/set (clean side)Win threshold: 4.50 errors/set9 errors/set (pressure side)

Blocking

Blocking is netting a small positive at 0.4 block points per set, with 1.6 block errors per set holding back the net game.

  • Blocking produces a net positive of 0.4 per set.
  • Block errors at 1.6 per set offset much of the stoppage value at the net.

Error load

1.60 errors/set

0 errors/set (clean side)Win threshold: 1.50 errors/set4 errors/set (pressure side)

Key takeaways

What's working

  • Side out at 60.7% shows your defense and transition are holding up under pressure.
  • Pass rating of 2.01 gives the offense a dependable starting point.

Watch items

  • Attack errors at 3.4 per set and dig errors at 3.6 per set are the biggest drains on scoring.

What to work on next

  1. Cut attack errors. Reduce the 3.4 attack errors per set to lift hitting efficiency above its current 0.186.
  2. Tighten digging. Lower dig errors from 3.6 per set to create more controlled transition opportunities.
  3. Convert serve pressure into points. Keep applying pressure with 0.8 aces per set and push point scoring on serve above 38.6%.

Were these insights helpful?

👍👎

Illustrative layout: club names and values are anonymized samples, not live data.

SoloStats Standard

5 team reports a month.

$10/mo

  • ✓SoloStats Insights: 5 team reports a month
  • ✓Full match stats in the app
  • ✓SoloStats Coach + WebReports
Get Standard, $10/month

Cancel anytime

Trusted by 50,000+ volleyball coaches.

Need more reports? See Pro: 20 team reports a month.

Questions

Does it take stats or analyze video for me?

No. You track matches in SoloStats123, then SoloStats Insights analyzes those stats. It is not a video stat tool.

Do I re-enter stats?

No. It uses the stats you already tracked. Pick your matches and run Insights.

How many matches do I need?

One match works, but it works best with 4 or more. More matches give stronger patterns.

How long does a report take?

About 15 seconds.

How many reports do I get?

Standard includes 50 credits a month, enough for about 5 team reports. Each report uses credits from your plan.

What if I use them all?

You can still open every report you already ran. New reports need credits, which refresh when your plan resets each month, or you can move to Pro for 200 credits a month (about 20 team reports).

Do unused credits roll over?

No. Unused credits reset each month.

What does SoloStats Coach not show?

SoloStats Coach shows raw stats. Insights adds benchmarks and ranked practice priorities.

Is this AI?

Yes. SoloStats Insights uses AI to analyze the stats you tracked, compares them with benchmarks for your competition level, and writes the readout. You make the coaching decisions.

What if my level isn't set?

Set your competition level first. It calibrates the benchmarks.

Can I cancel?

Yes, anytime. See how to cancel.

Ready for your readout?